Arlo is a wireless smart security camera, HD security camera for home monitoring. It lets you monitor and interact with visitors, from anywhere using your smartphone or other compatible devices.
But sometimes, it leads to unexpected issues like the Arlo camera blinking blue and the Arlo camera blinking orange. There could be various factors that can lead to the same problems.
However, the good news is that this issue is curable and can be fixed in a few simple steps. But many users don’t know how to troubleshoot it. If you are also one of those, who don’t know how to fix the problem.
Then, there is no need to worry, you have arrived at the correct destination. In this, you will get an easy-to-follow step-by-step guide to rectify the Arlo camera blinking blue and the Arlo camera blinking orange issue.
What are the Causes of Different LED lights on the Arlo Camera?
As with other devices, the Arlo camera also shows different issues. So, before jumping to resolutions, you should get familiar with the root causes. Here we have mentioned some common causes of the LED lights on the camera.
Arlo Camera Blinking Blue
If the LED light on your Arlo camera is blinking blue, then here are common causes for the same.
- The camera is trying to sync with the WiFi network.
- The connection is successful between the camera and the base station.
- Unstable or weak internet connection.
- The camera is trying to build a connection with the servers.
Arlo Camera Blinking Orange
If your camera is blinking orange then the following are the root causes of it.
- Hardware damage.
- Arlo isn’t synced with the base station.
- Depleted or consumed batteries.
- The batteries aren’t charged.
Methods to Troubleshoot the Arlo Camera Blinking Blue and Orange
After knowing the root factors of the orange and blue LED light on the camera, now it is time to fix it as soon as possible. Here we have listed some tested fixes to rectify the Arlo blinking blue and orange LED light. Just have a look at the following section.
1. Power Cycle the Camera
The foremost step to fix any problem is to power cycle the device. So, to resolve the orange and blue blinking light issues, you need to restart the Arlo camera. To power cycle, remove the camera from the power source and unplug it as well.
Then leave the camera ideal for some time and after a while plug the camera back and power it on. Once it gets on properly, check whether the problem is solved or not.
2. Re-inserts the Batteries
If the power cycle does not work out, then try to re-insert the batteries. To reinsert the batteries in the Arlo camera, you need to go through the following instructions.
- First, eject the camera from the wall stand and push the battery compartment button downwards.
- Then remove the cover, with all the battery protective tape and eject the batteries.
- After this, wait for a couple of minutes and place the batteries back into their places.
- Next, you have to reinstall the compartment and test the camera to see whether the orange or blue light is fixed or not.
3. Charge your Camera
The next method to solve the Arlo camera blinking blue and orange LED light is to charge the Camera. If your camera isn’t charged, then possibly you will encounter the same problem. Follow the below steps to charge the Arlo camera.
- Before proceeding take out the camera from the wall mount and remove the USB cover from the bottom of the camera.
- Next, plug one end of the charging cable into the wall outlet and another end of the USB cable into the camera.
- Then wait for at least 30-35 minutes and let the camera charge properly. After charging for a while, see if the LED light problem is solved or not.
4. Re-sync the Camera with the Base Station
If none of the above fixes solve the problem, then try re-syncing the camera with the base station. Usually, WiFi problems or syncing problems might cause the blinking orange and blue light problem.
If in case, the camera has lost connection to the base station and is currently not syncing. So, the best method to fix the problem is to sync the camera with the base station via the Sync button on its hardware.
To sync the device, press and hold the sync button, located on the side of the camera to restore the connection with the base station. After that, go through the in-app instructions on your mobile.
5. Place the Router Close to the Camera
Another method is to place the router close to the camera. When the camera isn’t connected to the WiFi, then it will automatically get connected to the cellular network.
Therefore, you need to connect your camera to your WiFi and also check if the camera is in the range of the router. If the camera is placed too far from the router, then the connection will break.
So, move the router near the camera to establish a proper connection. At last, connect the camera to the router again.
6. Reset the Arlo camera
Last but not least, reset the Arlo camera offline to fix the Arlo camera blinking blue and orange. This might help in resolving the blinking LED light problem. Here is how to reset the Arlo camera.
- Open the Arlo camera on your phone and visit Settings.
- Next, choose My Devices and choose the camera you want to reset.
- After that, click on Remove device and confirm it by pressing yes.
- Then visit back to the Device page and click on Add New Device.
- Now choose Cameras and follow the on-screen instructions to re-add the camera.
Sum up
Hope the above guide will help you to resolve the Arlo camera blinking blue and Orange LED light. There are various factors that can lead to the same problem. So, to rectify the Arlo camera blinking blue and the Arlo camera blinking orange. All you need to do is follow the above instructions as given.